Top-Of-The-Line N. M. PATEL & CO. Products

Filter Press

A range of sizes for your specific requirements. 450 mm x 450 mm to 2000 mm x 2000 mm.

Filter Plates

A range of sizes for your specific requirements. 450 mm x 450 mm to 2000 mm x 2000 mm.

Membrane Plates

A range of sizes for your specific requirements. 450 mm x 450 mm to 2000 mm x 2000 mm.

Automation Module

Hand Hydraulic Type, Power Hydraulic, Fully Automatic Presses, Capstan Type, Ratchet. Pinion & Gear Type.

Chamber Filter Press

  • Chamber plates are used instead of plates and frames. The filter medium is located between the plates. Solids are concentrated in the recess between the chamber plates – the chambers. Filter medium, depth of the chambers, filtration pressure, and materials are chosen according to the suspension’s characteristics. Compared with frame filter presses, significantly higher filtration pressures are possible. Standard constructions are available for 8, 15, and 60 bars.

Membrane Filter Press

  • As with chamber filter presses, the first filtration step is in the low-pressure range under hydraulic pressure. During the second filtration step, the filter cake is dewatered mechanically by the membrane. The membrane inflation medium transfers the necessary pressure to the filter cake via a membrane. The membrane inflation pressure can be increased up to 15 bar. Besides this standard construction, even higher membrane inflation pressures can be realized. The chamber depth is determined during construction, but the cake thickness can be adjusted to the changing product characteristics at any time.

Movable Filter Press

  • As with chamber filter presses, the first filtration step is in the low-pressure range under hydraulic pressure. During the second filtration step, the filter cake is dewatered mechanically by the membrane. The membrane inflation medium transfers the necessary pressure to the filter cake via a membrane. The membrane inflation pressure can be increased up to 15 bar. Besides this standard construction, even higher membrane inflation pressures can be realized. The chamber depth is determined during construction, but the cake thickness can be adjusted to the changing product characteristics at any time.

Filter Plates

CGR PLATE

MEMBRANE FILTER PLATE

RECESSED FILTER PLATE

Get in touch

×